Basic One-Touch ControlThe switch features three dedicated physical keys: Open Curtain, Close Curtain and Stop Curtain, allowing users to operate curtains directly with simple taps.

 

Interlock Protection Between ButtonsThe three function keys are mutually interlocked to avoid circuit conflicts. When you tap Open Curtain, the Close Curtain function will be disabled automatically. If Stop Curtain is pressed, both open and close outputs will cut off immediately.

 

Customizable Power-On StatusUsers can customize the curtain’s action when power is restored. The default setting opens curtains automatically after power up; we can also adjust the program to close curtains or keep curtains stationary upon power recovery based on project requirements.

 

Central Control & Scene Mode CompatibilityThis curtain switch supports linkage with a master central control panel. It will open curtains when the master control is activated and close curtains when the master control is turned off.It can also work with scene mode panels, yet the open and close functions cannot be bound to the same scene mode simultaneously to prevent logic errors.

 

Dual-Control & Multi-Control SupportDual-control or multi-control linkage is available. Simply assign the identical function code to multiple switch panels, and all panels can control the same set of curtains synchronously.

 

Adjustable Delay ControlProgrammable delay logic is built in. We set a standard 1-second interval between switching actions as an example: tapping Close Curtain will first terminate the Open Curtain output, and the Close Curtain relay will activate after a one-second delay to protect the motor circuit.

 

Auto Backlight & Relay Power-OffNo matter opening or closing the curtains, the key backlight will turn off automatically after 3 minutes of inactivity, and the internal relay will release to cut standby power, saving energy and extending product service life.